Operating instructions

Operation
36
Operating instructions 906 - Version 00.0 - 05/2014
5.11 Setting hook thread tension
Figure 18: Replacing the hook thread bobbin - Part 1
1. Press the Safe Stop switch (1).
 The drive carriage moves to the bobbin change position.
The cover plate (2) pivots to the side.
The sewing feet are moved to the lower position.
The lighting (3) is switched on.
WARNING
Risk of injury by the needle point or moving
parts.
Switch the sewing unit to the Safe Stop mode
before changing hook thread bobbin.
(1) - Safe Stop switch (2) - Cover plate
(3) - Lighting
②
①
③