Manualshelf

Operating instructions

ManualsBrandsDURKOPP ADLER ManualsBusiness equipment906
31323334353637383940
Operation
Operating instructions 906 - Version 00.0 - 05/2014
35
Figure 17: Replacing the hook thread bobbin – Part 2
2. Fold up the bobbin housing flap (5).
3. Remove the empty bobbin.
4. Insert a full bobbin (4).
Important: Insert the bobbin (4) so that it moves in the opposite direc-
tion of the hook when the thread is pulled out.
5. Feed the hook thread through the slot (8) in the bobbin housing.
6. Pull the hook thread under the tensioning spring (8).
7. Feed the hook thread through the guide (6) and pull it approx. 3cm
further.
8. Close up the bobbin housing flap (5).
9. Release the Safe Stop button (1).
The cover plate (2) pivots back to the original position.
Taking account of changing the hook thread bobbin in the seam
program
How to take account of changing the hook thread bobbin in the seam pro-
gram is described in 7.7 Replacing the hook thread bobbin, page 77.