Operating instructions

Operation
Operating instructions 906 - Version 00.0 - 05/2014
31
4. Feed the thread clockwise around the tensioner (9).
5. Insert the thread through the thread guides (7) and (8).
6. Feed the thread clockwise around the diverter (6).
7. Feed the thread under the thread tensioning spring (5), through the
guide (3) and through the thread regulator (2) to the thread lever (1).
8. Feed the thread through the thread lever (1) and thread guide (4).
Figure 13: Threading in the needle thread part 2
9. Insert the thread through the needle thread monitor (12) and the thread
clamp (13).
10. Insert the thread through the thread guides (15) and (14).
11. Insert the thread through the needle eye in such a way that the loose
thread end faces the hook.
(12) - Needle thread monitor
(13) - Thread clamp
(14) - Guide
(15) - Guide
⑫
⑬
⑭
⑮