Operating instructions

Operation
Operating instructions 906 - Version 00.0 - 05/2014
27
5.5 Pivoting the machine upper section
The machine upper section can be raised for maintenance work.
5.5.1 Raising the machine upper section
Important: The drive carriage (2) must be moved to the left stop position.
Figure 8: Drive carriage moved to the left stop position
1. Press in the "Safe Stop" switch (3)( 5.2 Switching on Safe Stop,
page 22).
 The drive carriage moves to the left stop position.
2. Turn the main switch (1) to the left into the "0" position.
 All drives and the controller are disconnected from the mains grid.
WARNING
Risk of injury from sharp or moving parts.
Switch off the sewing unit at the main power switch
before raising the machine upper section and per-
forming maintenance work.
①
(1) - Head cover
(2) - Drive carriage
(3) - Safe Stop switch
②
③