Operating instructions

Operation
24
Operating instructions 906 - Version 00.0 - 05/2014
5.4 Sewing on pre-bound pockets
After using the two-hand control, the sewing process is carried out
step-by-step:
• The transfer plate transfers the sewing material to the clamp and
moves back into its starting position.
• The sews the pre-bound pocket onto the sewing material.
• The automatic stacker places the sewn product onto the bundle mount.
WARNING
Risk of injury from moving parts.
During the sewing process, machine parts move
quickly.
Do not reach into the transfer plate, the drive
carriage or the automatic stacker when using
the two-hand control.
Only feed-in the next sewing material once the
transfer plate has transferred the sewing material
and has returned to the starting position.
ATTENTION
The machine can be damaged by sewing without material.
Always place material under the transfer plate before starting the sew-
ing process.