Operating instructions

Operation

Operating instructions 906 - Version 00.0 - 05/2014

5.3 Switching on the Quick-stop

The Quick-stop switch (1) can be used to immediately stop all working

steps on the machine, e.g. after an operating error.

Figure 5: Switching on Quick Stop

Stopping working steps via Quick Stop

1. Press the Quick Stop switch (1).

 All working steps on the machine are immediately stopped.

Switch off the power to the sewing unit

1. Turn the main switch (2) to the left into the "0" position.

 All drives and the controller are immediately disconnected from

the mains grid.

WARNING

Risk of injury from sharp or moving parts.

After a Quick Stop, power is still present in the sew-

ing unit and the clamps can move.

You must always switch the machine off at the main

switch (2) before performing any maintenance or

cleaning work.

(1) - Quick Stop switch (2) - Main switch

②

①