Operating instructions

Operation
22
Operating instructions 906 - Version 00.0 - 05/2014
5.2 Switching on Safe Stop
Figure 4: Switching on Safe Stop
Switching on Safe Stop
1. Press in the switch button (3).
Important: The switch button must latch into place.
 The sewing unit is in the Safe Stop mode.
The drive carriage (1) is moved to the left position.
The lamp in the button lights up.
The area around the hook cover (2) is lit up.
Switch off Safe Stop
1. Press in the switch button (3).
Important: The switch button must latch out of place.
WARNING
Risk of injury from sharp or moving parts.
The sewing unit must first be switched off or
switched to a Safe Stop before performing any
maintenance or setup work.
When the Safe Stop is active, do not reach into the
hook area until this is lit up.
(1) - Drive carriage
(2) - Hook cover
(3) - Safe Stop switch
③
②
①