Operating instructions

Operation
Operating instructions 906 - Version 00.0 - 05/2014
21
5 Operation
5.1 Switching the sewing unit on and off
Figure 3: Switching the sewing unit on and off
Switching on the sewing unit
1. Turn the main switch (1) to the right into the "I" position.
 The sewing unit is referenced.
After referencing, the startup screen is displayed on the operating
terminal for a few seconds.
On the start screen, you can set the language for the user interface in the
Language menu or open the Service menu ( 7.3 Starting the soft-
ware, page 64).
Switching off the sewing unit
1. Turn the main switch (1) to the left into the "0" position.
 All drives and the controller are disconnected from the mains grid.
(1) - Main switch
①