Operating instructions

Decommissioning
128
Operating instructions 906 - Version 00.0 - 05/2014
10.2 Dismantling the automatic stacker
The dismantling of the automatic stacker is optional. However, it could be
necessary to dismantle it for transport or space-saving storage.
Figure 81: Dismantling the automatic stacker
1. Switch off the machine at the main switch.
2. Release quick coupling of the main compressed air supply.
3. Disconnect the compressed air hose on the valve block from the pneu-
matic connection (5).
4. Disconnect plugs of the valve control lines (6).
• When disconnecting, simultaneously release the lock.
5. Remove the equipotential bonding (7):
• Loosen hexagonal socket screw (screwdriver width 4 mm)
• Remove the equipotential bonding line.
WARNING
Risk of injury.
The automatic stacker is heavy and has bulky
dimensions.
Carry out the dismantling with two people in order
to avoid back injuries or crushing injuries if the
machine falls down.
(1) - Setscrews
(2) - Threaded screws
(3) - Cover plate
(4) - Support pipe
(5) - Pneumatic supply
(6) - Plug for valve control lines
(7) - Equipotential bonding
⑤
⑥
③
②
④
⑦
②
①