Operating instructions

Creating programs with DA CAD 5000
Operating instructions 906 - Version 00.0 - 05/2014
125
9 Creating programs with DA CAD 5000
You can use the DA CAD 5000 program to create seam programs on
a PC. The DA CAD 5000 program is available as additional equipment
 2.3 Additional equipment, page 12.
This manual only provides an overview of the program steps. A detailed
description is provided in the  Operating instructions for the DA CAD
5000 program.
Selecting the machine class
The first step is to select the machine class.
Figure 78: Selecting the machine class
Creating the seam contour
The next step is to draw the seam contour.
Figure 79: Drawing the seam contour