Operating instructions

Settings via the software
106
Operating instructions 906 - Version 00.0 - 05/2014
Defining the operating password protected areas
1. Tap the menu items Extras > Service > Settings.
 The Settings window opens.
2. Tap the Operator Password option in this window.
 In the next window the Activate/Deactivate option indicates the
type of password protection:
•  - Comprehensive password protection activated:
Password protection of the first action after switching on
•  - Comprehensive password protection deactivated:
Password protection for the technical menu items only
3. Tap the Activate/Deactivate option to switch between the settings.
4. Confirm with OK.
Important: Switch the machine off and on again to adopt the setting.
Changing the language
1. In the menu item Extras > Service > Settings tap the Language
option.
 The list of available languages is displayed.
2. Tap the desired language.
3. Confirm with OK.
 The screen is reloaded in the selected language.
Setting the date and time
1. In the menu item Extras > Service > Settings tap the Date and
Time option.
 The data entry window for date and time is displayed.
2. Enter the date and/or time.
3. Confirm with OK.
 The entered values are adopted
Setting the brightness
1. In the menu item Extras > Service > Settings tap the Control
panel settings option.
2. In the following window tap the Contrast Brightness option.
 A window with slider controls is displayed.
3. Pull the corresponding slider control up or down to change the value.
 The changes are immediately displayed.