Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
105
7.19 Checking and changing the technical settings
The technical settings are made via the menu item Extras > Service.
Figure 69: Technical menu items
A password must always be entered in order to access the menu items in
Extras > Service (
 7.4.1 Entering a password, page 67).
7.19.1 Adjust the contour data
Password options
Certain areas are protected from direct access and can only be reached
through a password. With the master password and operator password,
two access levels are available to you.
• The master password provide unrestricted access. The password is
"25483" and cannot be changed.
• You can change the operator password and also define whether the
password only applies to the technical menu items or must always be
entered after the machine is switched on.
Changing the operator password
1. Tap the menu items Extras > Service > Settings.
 The Settings window is displayed.
2. Tap the Operator Password option in this window.
3. In the following window tap the option Change password.
 The window for entering the new password appears.
4. Enter the new password ( 7.4.1 Entering a password, page 67).
Important: The password must not have more than 5 digits.
5. Confirm the entry with OK.