Operating instructions

Settings via the software
100
Operating instructions 906 - Version 00.0 - 05/2014
7.18 Editing machine parameters
You use the machine parameters to define the basic machine settings that
apply to all programs.
1. Tap the menu items Edit > Machine parameters.
 The window for selecting the machine parameter group is displayed.
Figure 68: Select the machine parameter group
2. Tap the desired parameter group.
 The individual parameters of this group are displayed.
3. Tap the desired parameter.
 The window for modifying the parameter value opens.
4. Set the parameter to the desired value ( 7.4.8 Entering parameter
values, page 72).
There are 6 machine parameter groups:
Symbol Parameter group
MP1 - Configuration
General settings
MP2 - Limit values
Limit values for speeds and positions
MP3 - Needle thread monitor
Behavior after thread breakage
MP4 - Thread cutting
Speed, position and tension
MP5 - Thread clamping
Starting angle
MP6 - Counters
Settings for program and bobbin counters