Operating instructions

About this operating instructions
8
Operating instructions 906 - Version 00.0 - 05/2014
1.7 Proper use
The Dürkopp Adler 906 CNC sewing unit is used for sewing pre-bound
or other pockets onto jeans. The material requires a needle strength
of 120 - 140.
The machine is only intended for use with dry material. The material can-
not contain any hard objects.
The seam is created with thread made of textile fibers (cotton threads,
synthetic threads/core-spun threads).
The CNC sewing unit is intended for industrial use.
The CNC sewing unit may only be set up and operated in dry conditions
on well-maintained premises. If the machine is operated on premises that
are not dry and well-maintained, then further measures may be required
which must be compatible with EN 60204-31:1999.
Only authorized/trained personnel may operate the machine.
Any other use of the CNC sewing unit can lead to hazards and is
prohibited.
WARNING
Risk of electric shock, crushing and punctures!
Improper use can result in injury.
Please observe all instructions in the manual.
ATTENTION
Improper use can result in material damage.
Please observe all instructions in the manual.