Instruction manual

5.4 Mounting the M-Control PCB

–

Mount the M-Control PCB 1 to the right of the set value initiator 2.

–

Connect the compressed air hose 4 to the compressed a ir

maintenance unit 8.

–

Fix the two compressed air hoses 7 from the machine head onto

the throttle valves / solenoid valves 5 and 6.

–

Plug the electric cables 3 into the corresponding sockets.

Note

If the function of the keys “L”and“R” are permuted, swap the

compressed air hoses 7 at the solenoid valves.

765 4 3