Operation Manual

6.13 Controlling the machine equipped with a positioning motor

6.13.1 Using the pedal

The pedal position is scanned by a sensor distinguishing 16 levels.

The meaning is given in the t able:

Pedal position Pedal motion Meaning

-2 Over heel fully backwards Command for thread trimming (seam finishing)

-1 Over heel slightly backwards Command for foot lifting

0 Neutral position See notes

1 Slightly forwards Command for foot lowering

2 Further forwards Sewing at minimum speed (1. speed gear)

3 Further forwards Sewing - 2. speed gear

:::

13 Fully forwards Sewing at maximum speed (12. speed gear)

Note:

In addition to the neutral position, it is possible to pre-select the

needle position (down/up) and the foot position (down/up) at the

stopping in the seam (by the pedal positioning in the neutral position),

the foot position (down/up) after the seam finishing (by the pedal

treading fully backwards and positioning the pedal in the neutral

position).

-2

-1