Operation Manual

6.2 Winding the hook thread

–

Thread the thread according to the picture.

–

Insert the thread under the knife 1 and tear off by pulling in the

arrow direction 2.

–

Fix the bobbin and press t he lever 3 in the direction 4.

–

Start the machine up.

–

After the thread winding, slide the thread under the knife again 1

and tear it off.

–

Insert another bobbin immediately and press the lever 3.

6.3 Inserting the bobbin and threading the hook thread

Caution! Risk of injury!

Switch the main switch off and wait till the motor stops.

–

Tilt the shutter 1 up.

–

Insert the bobbin 2 with the thread end 3 oriented according to the

picture.

–

Thread the thread through the slit 4 and space 5, hook upon the

shutter 1 and fasten it under the spring 6.

–

Draw the thread in the sewing direction to the throat plate corner

(about 40 mm).

–

Close the cover hook 7.

–

Cut the protruding thread.