Operating instructions

7. Connecting the Compressed Air Maintenance Unit

–

For the operation of certain sub-classes and optional

equipment a supply of water-free, slightly oiled

compressed air is required.

–

Attach the maintenance unit to the frame as shown

in the illustration.

–

Establish the Pu3 hose connection 1 between the

maintenance unit and machine head.

–

Connect the maintenance unit with customer

supplied connection hose 4 and fittings to the

compressed air -supply mains.

–

With disconnected or shut off compressed air supply

fill the oil reservoir 3 up to the groove marking with

ESSO SP-NK 10 lubricating oil after removing screw

–

After pulling up and turning the grip 5 set the

operating pressure at 6 bar.