Instruction manual

4. Machine head assembly

4.1 Machine head fixing into stand

4.1.1 Motor integrated on machine head

–

Tilt the machine head (1) slightly and insert it in the recess in the

table top.

–

After inserting the machine head (1) into the inserts (2) /tilt

position/ loosen the screw ((3) and slide the prop (4) up to a stop

and tighten the screw (3).

–

Partly screw two screws (5) in the machine head (1).

–

Fix the belt guard, screw the screw (6) down and slightly tighten all

fastening screws.