Instruction manual

3.3 Stand height setting

–

The stand height is adjustable between 750 and 900 mm.

–

Loosen the screws (1).

–

Set the required table top height and make sure that it is identical

on both sides. To do so, make use of the scale on the stand feet.

Set the stand height so that it corresponds with the operator´s

bodily proportions.

Attention! Danger of injury!

Failure to adjust the stand height to the operator´s bodily proportions

may result in damage of the operator´s locomotive organs.

–

Tighten the screws (1).