Instruction manual

Sewing an intermediate bartack
- Push down t he stitch regulator lever 6.
The machine sews reverse stitches as long as the stitch
regulator lever is pressed down.
The rotation speed is determined through the pedal.
or
- Actuate key 5.
Sewing over a cross seam.
(max. sewing foot stroke)
The max. sewing foot stroke is switched on.
The rotation speed is limited to 1600 min
-1
.
Operation modes of the max. sewing foot stroke:
- Press briefly the knee switch to switch on the max.
sewing foot stroke.
- Actuate the knee switch again to switch off the max.
sewing foot stroke.
Sewing the 2
nd
stitch length during
the sewing process
(max. stitch length)
- Actuate key 2.
Increase the thread tension during
the sewing process
- Actuate key 1.
At the seam end
Remove the material
- Push the pedal all the way back and keep it pushed.
The final bartack will be sewn (if activated).
The thread will be trimmed.
The machine halts in the 2
nd
position.
The needles are lifted (Turning back).
The sewing feet are lifted.
- Remove the material.
34
6
54 3 21