Operation Manual

Set-up instructions
Operating instructions 867 - 02.0 - 08/2015 95
7.12.4 Connecting the controller
Connecting the controller consists of the following work:
• Insert the plugs of all connecting cables in the sockets on the
back of the control.
• Connect the control to the power supply using the power
cable.
Read the  Operating manual for the respective controller:
• Efka DC1550/DA321G controller:
The operating manual is provided in the controller accessory
pack.
• DAC ECO and DAC CLASSIC controllers:
The operating manual is provided in the controller accessory
pack. The operating manual is also available in the download
area at www.duerkopp-adler.com.
Figure 67: DAC CLASSIC connection sockets
Danger to life due to electric shock.
Disconnect the power plug before connecting the
controller.
Make sure the power plug cannot be unintention-
ally reinserted.
DANGER