Operation Manual

Set-up instructions
88 Operating instructions 867 - 02.0 - 08/2015
7.10.2 Fitting the electric knee lever
Figure 59: Fitting the electric knee lever
1. Screw the knee lever (1) in front of the oil pan firmly in place
under the table plate.
2. Guide the connecting cable (2) to the back between the oil
pan and the control.
3. Insert the plug (3) of the connecting cable in the socket of the
control.
1
2
3
(1) - Knee switch (2) - Connecting cable
(3) - Plug