Operation Manual

Set-up instructions
Operating instructions 867 - 02.0 - 08/2015 87
7.10 Fitting the knee lever
The machine has either a mechanical or electrical knee lever,
depending on the subclass and equipment.
7.10.1 Fitting the mechanical knee lever
Figure 58: Fitting the mechanical knee lever
1. Fold the machine head back.
2. Fit the transmission rod (3) in the oil pan.
3. Screw the knee lever (1) rods together.
4. Guide the rod (1) through the hole in the oil pan (2) and connect
it to the transmission rod (3).
3
2
1
(1) - Knee lever rod (2) - Hole in the oil pan
(3) - Transmission rod