Operation Manual

Set-up instructions
Operating instructions 867 - 02.0 - 08/2015 83
7.7.1 Fitting the control
The DAC controllers and Efka controllers are installed according
to the same principle.
Figure 54: Fitting the control
1. Screw the control (2) onto the 4 screw holders (3) under the
table plate.
2. Clamp the power cable of the control (2) into the strain relief
mechanism (1).
3. Screw the strain relief (1) under the table plate.
3
2
1
(1) - Strain relief (2) - Control
(3) - Screw holder