Operation Manual

Operating instructions
28 Operating instructions 867 - 02.0 - 08/2015
5.3 Threading in the needle thread
In all machines the thread from the thread reel is fed to the
machine via the unwinding bracket.
Figure 6: Thread guide on the unwinding bracket and machine arm
1. Fit the thread reel on the thread reel holder (2).
2. Insert the thread from the rear to the front through a hole in
the guide on the unwinding bracket (1).
Risk of injury by the needle point and moving
parts.
Switch off the sewing machine before inserting the
thread.
WARNING
1
2
(1) - Guide on unwinding bracket
(2) - Thread reel holder