Operation Manual

Setup
Operating Instructions 867-M PREMIUM - 00.0 - 02/201560
7.13Pneumatic connection (optional)
7.13.1 Fitting the maintenance unit
Specify order number 0797 003031 to order the pneumatic
connection package. It includes:
• System connection hose
(length 5 m, diameter 9 mm)
• Hose connectors and hose clamps
• Coupling socket and coupling plug
Proper setting
The system pressure for the pneumatic unit is 8 – 10 bar.
Fig. 38: Fitting the pneumatic system maintenance unit
1. Attach the maintenance unit (3) to the upper cross bar (1) of
the frame using the bracket, screws and clip.
2. Connect the machine hose (4) coming out of the machine head
to the maintenance unit (3) at the top right.
3. Connect the system connection tube (2) to the pneumatic
system.
NOTICE
Machine damage possible due to incorrect pressure.
Incorrect pressure can result in damage to the machine.
Make sure that the system pressure is set to 8 – 10 bar
before mounting the pneumatic system.
0
2
8
4
6
10
4
3
1
2
(1) - Cross bar
(2) - System connection tube
(3) - Maintenance unit
(4) - Machine hose