Operation Manual

Settings via the software

Operating Instructions 841 - 00.0 - 09/2014

6.4 Setting the buttonhole program

6.4.1 Buttonhole setup

Figure 16: Buttonhole setup

Pos. Parameters Meaning

1 First tacking • First tacking to be sewn after the forward seam

2 End bar tack • Final tacking after the return seam

3 Forward seam • Buttonhole seam from start of sewing to first tacking

4 Return seam • Buttonhole seam between first tacking and final tacking

5 Buttonhole width • Distance between the outer stitches of a buttonhole.

- Cutter length • Length of cutting edge of cutter in mm

6 Cutting length • Length of buttonhole to be cut in mm (= seam length)

7 Width of

intermediate fabric

• Distance between the inner stitches of the forward and

return seam

8 Overstitch • Buttonhole seam width

9 Stitch distance • Distance of a double stitch in y-direction

10 Length before cut • Distance between first tacking and cut

11 Length after cut • Distance between final tacking and cut

12 - • Buttonhole seam width left

13 - • Buttonhole seam width right

⑤

②

③

④

①

⑥

⑪

⑩

⑧

⑫

⑬

⑦

⑨