Operation Manual

Operation
Operating Instructions 841 - 00.0 - 09/2014
35
Figure 15: Cleaning the filter element
Cleaning steps
1. Drain the water condensation ( page 33).
2. Unscrew the water separator (2).
3. Unscrew the filter element (1).
4. Blow out the filter element (1) using a compressed air gun.
5. Wash out the filter tray using benzine.
6. Tighten the filter element (1).
7. Tighten the water separator (2).
8. Tighten the drain screw (3).
5.12.5 Checking the toothed belt
The condition of the toothed belt must be checked once a month.
A damaged toothed belt must be replaced immediately.
Correct setting
• The toothed belt exhibits no cracks or fragile areas.
• When pressed with a finger, the toothed belt must yield no more than
10 mm.
(1) - Filter element
(2) - Water separator
(3) - Drain screw
0
2
8
4
6
10
2
3
1
WARNING
Risk of injury
Crushing injuries from moving parts.
Switch off the machine before checking the condi-
tion of the toothed belt.