Operation Manual

Operation

Operating Instructions 841 - 00.0 - 09/2014

5.9 Setting the buttonhole distance to the front edge

The distance of the buttonholes to the lay edge can be within a range

between 10 and 20 mm.

Figure 11: Setting the buttonhole distance

1. Using the setting wheel (1) set the distance of the buttonholes to the lay

edge. The pointer (2) can be used as orientation for how the distance

is set.

5.10 Marking the lay points

1. Mark the lay points on the infeed unit for the sewing material according

to the needle e.g. with a sticker.

5.11 Sewing

5.11.1 Switching on the machine

1. Switch on the main switch (1)

 The controller loads the machine program. The operator is requested

to start the reference run with the message <==== REF.

2. Press the start button (2).

 The infeed unit moves to left end position.

The display switches to the main screen.

CAUTION

Risk of injury from the point of the needle and

moving parts

During the reference run, do not reach into the

movement area of the infeed unit.

(1) - Adjusting screw (2) - Pointer

②

①