Operation Manual

Operation

Operating Instructions 841 - 00.0 - 09/2014

Figure 10: Changing the cutter

1. Press the Safe Stop key.

2. Loosen the screw (2).

3. Remove the cutter (3).

4. Insert the new cutter and push it right to the top.

5. Tighten the screw (1).

Important

If the cut does not run central in the buttonhole or is not parallel to the but-

tonhole seams, the cutter will have to be realigned. For more information

see  Service manual.

(1) - Screw (2) Cutter

②

①