Operation Manual

Operation
24
Operating Instructions 841 - 00.0 - 09/2014
Figure 7: Changing the needle
1. Loosen the screw (1).
2. Pull the needle out towards the bottom.
3. Insert the new needle and push it right to the top.
4. Align the needle so that its scarf/groove is turned away from the cutter.
5. Tighten the screw (1).
5.6 Setting the sewing basket pressure
The sewing basket pressure is set to the maximum value. This pressure
only needs to be reduced for sensitive sewing materials.
Figure 8: Setting the sewing basket pressure
1. Set the sewing basket pressure at the screw (1).
• To increase pressure: Turn screw clockwise.
• To reduce pressure: Turn screw counterclockwise.
(1) - Screw
①
(1) - Screw
①