Operation Manual

Operation
Operating Instructions 841 - 00.0 - 09/2014
21
5.3 Winding the hook thread
Figure 5: Threading the hook thread
1. Fit the thread reel on the thread reel holder.
2. Fit the bobbin on the bobbin winder (2).
3. Thread the hook thread as shown in the following figure.
4. Wind the hook thread clockwise approx. 5 x around the bobbin core.
5. Pivot the bobbin lever (1) towards the bobbin so it engages.
 The hook thread is automatically wound onto the bobbin. The bobbin
lever (1) finishes winding as soon as the bobbin is full.
6. Tear off the hook thread at the thread clamp (3).
(1) - Bobbin lever
(2) - Winder
(3) - Thread clamp
③
①
②