Operation Manual

Operation
Operating Instructions 841 - 00.0 - 09/2014
19
5 Operation
5.1 Switching the unit on and off
For the sewing unit to be ready for operation, the infeed unit must be
moved to reference position after being switched on.
The reference run is necessary in order to obtain a defined starting posi-
tion for the infeed unit.
Figure 3: Switching the unit on and off
Switching on the machine
1. Switch on the main switch (2)
 The controller loads the machine program. The operator is requested
to start the reference run with the message <==== REF.
2. Press the start button (1).
 The feed unit moves to the left stop position.
The display switches to the main screen.
Switch off the machine.
1. Switch off the main switch (2)
WARNING
Risk of injury
Crushing injuries from moving parts.
During the reference run, do not reach into the
movement area of the infeed unit.
(1) - Start button (2) - Main switch
②①