Operation Manual

Machine Description

Operating Instructions 841 - 00.0 - 09/2014

Changing the parameters/numerical values

1. Select the rows where the value is located using the buttons.

2. Press the OK button.

 Cursor flashes below a numerical value position.

3. Switch between the positions using the buttons.

4. Increase or reduce the value using the buttons.

In case of parameters that cannot be changed arbitrarily, another pos-

sible parameter value will appear after the buttons have been pressed.

5. Press the OK button.

 The set value is transferred.

6. To prevent the set value being accepted, press the ESC button.

 The original set value is restored again.

• Controller switches from sewing mode to programming mode.

The buttonhole parameters may be modified.

• Controller switches from sewing mode or programming mode to

index programming mode.

• Change mode:

Press x1: Controller switches to manual sewing mode.

Press x2: Controller switches to technician mode.

Technician mode can only be activated after entering a code.

Basic machine parameters can be set here and diagnosis and

setting programs opened up.

• Safe stop: Feed device moves back, cutter and needle are

moved apart e.g. for inserting the thread.

• Fast stop: Interrupts sewing

Key Function