Operation Manual

806N device description
20 Operating manual 806N Version 00.0 - 12/2012
Detailed description of the key panel
The individual elements of the key panel always have two components:
The button and a label field.
A description of the function can be found in the table below in addition to
the illustration and designation of the keys.
Key Designation Function
Stop key The stop key does not light up.
If you press the stop key, the machine ends
the current work step and comes to a safe
stop. The activities described in  Section
5.8 Activities on the machine can be per-
formed safely.
Start key The start key can light up or flash in green.
If the start key lights up, you can start a
procedure on the machine by pressing
manual key 1. If the start key flashes, an
error has to be eliminated or a requirement
met. Then press manual key 1 in order to
resume the procedure.
Cancel key The cancel key does not light up. The cur-
rent edge folding procedure is stopped by
pressing the cancel key. The sewing proce-
dure is resumed.
Safe stop Safe stop is not a key, but a lamp which
lights up in white. The safe stop lamp indi-
cates that no working procedure is active.
The activities described in  Section 5.8
Activities on the machine can be performed
safely.
EMERGENCY
STOP
The EMERGENCY STOP button does not
light up. The machine stops all procedures
and is disconnected from the power supply
if you press the EMERGENCY STOP but-
ton. The EMERGENCY STOP button must
be reactivated after actuation in order to
resume work,  Section 5.10, Emergency
procedure.