Operation Manual

1.4 Optional equipment

Order No. Optional equipment A B D F

0745 597514 Downholder- pocket bag clamp

Downholder for smoothing the fullness

caused by darts as well as a

clamping device for pocket bags

0745 597524 Waistband clamp

For smoothing the fullness.

Only possible in conjunction with 0745 597514

0745 597534 Three-pack lasers

For expanding the 5 standard laser markings

to a maximum of 8 laser markings

(The method F always includes

8 laser markings)

XXXX

0745 597544 Endless zipper

Scissors with roll-off device for endless zippers

without slider

0745 597554 Throw-over stacker

To be positioned near the machine for stacking to the

side or to the back.

Furthermore, this throw-over stacker is equipped with

an easy-to-operate height adjustment and

a swivel device.

XXXX

0745 597594 Ejector roller

The ejector roller can be used for transporting short

pieces into the stacker

or for ejecting the pieces to be processed. Speed and

working cycle of the ejector roller can be regulated

according to the program.

XXXX

0745 597604 Blow-out device

For blowing the finished workpieces out

0745 597614 Shaped guide “Lining loop triangle”

In case of inside pockets the lining loop triangle

is fed automatically.

0745 597624 Vacuum (side channel compressor)

For precise positioning of the material without

an in-house vacuum unit the side channel compressor

can be inserted in the basic unit.

XXXX

0745 597664 Electromotoric tape feed/Automatic cutting

Automatic feeding and cutting of a

reinforcement strip pulled from a roll. Start time and

cutting time can be programmed

corresponding to the pocket.