Operation Manual

2.15.7 Folder monitoring

The folder in use is monitored by the sensors S 22 and S 23. The

sensors are actuated by a hexagonal bolt screwed in the pick-up

folder.

If a sewing program with incorrect clamp position settings is started,

the following message appears:

Error 1004

Correction

–

Step back on the left pedal.

The error message is cancelled.

–

Select another program or alter the setting in the program.

Setting

Single piping, left

The upper sensor S 23 is active. The outer position of the left clamp

must be set.

Single piping, right

The lower sensor S 22 is active. The outer position of the right clamp

must be set.

Double piping

None of the sensors is active.

S23

S22