Operation Manual

Positioning the piping strip

Double piping:

–

Position the piping strip centered on the feeding clamps and flush

with the front edges.

Single piping (left) with separately positioned facing (right):

–

Position the piping strip on the left feeding clamp flush with the

cutting line.

–

Position the facing on the right feeding clamp.

This positioning method requires the flap clamp “right” (Order

No.0792 011162) available as optional equipment.

–

The edges 1 and 2 must be sufficiently seized by the needle, but

must not be cut by the center knife.

Single piping left with grown-on facing

–

Position the piping strip at stop 3 on the left folding plate.

ATTENTION!

With grown-on facing the right folding plate

must not close.

Pull off the hose coupling

at the right feeding clamp.