Operation Manual

2.5 Thread Monitor for the Needle Thread

The switch

b14

monitors the needle thread.

Function

–

After a breaking of the needle thread the thread guide 1 drops

down.

The switch

b14

remains unoperated.

–

The machine head positions in position 2 (needle up).

The display of the control unit shows the symbol "

-x-

" (needle

thread break).

Caution Risk of Injury !

Before threading the needle thread turn the main switch off.

Renewed starting is only possible after turning the main switch off and

on again.

–

Thread the needle thread again and lead it through the thread

clamp.

–

Turn the main switch on.

–

Start a new sewing sequence.

b14