Operation Manual

2.13 Work Area, Angle and Length

The

dart depth

is dependent on:

–

the form set used

–

the dart length

–

the setting of the folding table

The folding table is continuously adjustable between 0 - 10°.

The dart depths for other angles and lengths can be found in the

diagrams.

The curve for the form set

0793 078002

is also listed.

Caution Risk of Injury !

Turn the main switch off.

The angle may only be set with the sewing unit turned off.

Setting the angle

–

Press handle 2 together and set the folding table according to the

scale 1.

–

Release the handle.

The angle is set.

Setting the length

Maximum

dart length

150 mm.

–

The seam length control occurs via programming

(keys L1, L2, L3 ) or via the light barrier.

The programmed seam length control is recommended for

diaphanous material.