Operation Manual

2.5 Dart Depth

The dart depth is dependent on:

–

the configuration set used

–

the dart length

–

the setting of the folding table

The folding table is continuously adjustable between 0 - 10°.

Example:

With configuration set

0793 078001

the dart depth is:

–

maximum 0.4 cm at 0° and 9.5 cm dart length

–

maximum 2.1 cm at 10° and 9.5 cm dart depth

THe diagram shows the dart depths for other angles and lengths. The

curve for configuration set

0793 078002

is also shown.

Setting the angle

–

Press the handle 2 together and adjust the folding table according

to the scale 1.

–

Release the handle.

The angle is set.

2.6 Dart Length

Maximum dart length 150 mm.

The dart length control occurs via programming ( Buttons L1, L2, L3 )

or the light barrier.

A programmed seam length control is recommended for diaphanous

material.