Operation Manual

4.2 Infeed of material clamps

Caution: risk of breakage!

Do not insert material clamps that are not properly closed.

–

Place mateial clamp on guide rod 1 and press until it is engaged in

the toothed profile 2.

4.3 Starting of sewing operation

–

Press key “S”.

The sewing operation is started. The material clamp is pulled in.

Insert additional material clamps for continuous processing.

4.4 Termination of sewing operation

–

Press key “ESC”.

The sewing operation is terminated.

–

Press “OK”.

The display reads as follows, indicating that a reference run is

required:

To remove material clamp that is still inserted in the machine use the

arrow keys “ “ and ” “ to manually move and remove it.

1-21

“ESC” “OK”