Operation Manual

6.11 Setting the sewing feet in the high position

–

Swivel lever 1 downwards.

Set the sewing feet in the high position.

–

Swivel lever 1 upwards.

The sewing feet are released.

–

The sewing feet are raised pneumatically or with the knee lever.

The lever 1 swivels back to its starting position.

6.12 Sewing-foot pressure

The knob 2 is used to set the r equired sewing-foot pressure.

CAUTION !

The sewing material should not “swim”.

Do not set more pressure than necessary.

–

Raising the sewing-foot pressure = Turn the dial 2 clockwise.

–

Lowering the sewing-foot pressure = Turn the dial 2

counter-clockwise.