Operation Manual

14
4.3 Connecting the DA321G control unit
– Insert the lead from the controller (pedal) into socket B80 of the control
unit.
– Insert the lead from the motor sensor 1 into socket B2 of the control unit.
– Insert the lead 2 from the motor into socket B41 of the control unit.
– Insert the lead to the sewing machine into socket A of the control unit.
– Lay all leads through the cable duct.
– Insert the lead from the control panel (if present) into socket B776.
4.4 Connecting the knee switch
– Insert the knee switch cable 3 into the KN19 socket on the front.
– Use the clips 4 to secure the cable 3 in place (667-180312 and 667-
180332 only).
Fig. 17 Fig. 18
1
2
3
4
KN19
B776
V8 . .
B18
LSM...
B2
M
B80
EB.. .
B41
M
A