Operation Manual

4
3 Assembling the stand and table plate
3.1 Assembling stand MG 55-3
Fig. 2
– Ass
emble the stand in accordance with the illustration.
– Fasten the pedal 2 to the stand brace 1.
– Affix the stand brace 1 to the stand.
– Align the pedal after assembling the entire machine (see chapter 3.4).
– Screw on the holder for the oil can 3.
– Turn the adjusting screw 4 to ensure the stability of the stand.The stand
must rest with all four feet on the floor.
3
4
1
2