Operation Manual

13
3.6 Winding on the hook thread
– Put the thread reel on the thread stand and lead the hook thread
through the unwinder arm.
– Pull the thread through guide 5, tensioner 3 and guide 4.
– Place the thread behind the blade 6 and sever it.
– Insert the bobbin 1 onto the bobbin winder. There is no need to
wind the thread onto the bobbin by hand.
– Press the bobbin-winder lever 2 into the bobbin.
– Start sewing. The bobbin winder lever terminates the process as
soon as the bobbin is full. The bobbin winder always stops in such
a way that the blade 6 is in position.
– Remove the full bobbin 1, place the thread behind the blade 6 and
sever it.
– Fit an empty bobbin onto the bobbin winder for the next winding
process and press the bobbin-winder lever 2 into the bobbin.
Fig. 7 Fig. 8
CAUTION: Risk of breakage!
If the thread is not to be wound on during sewing, the sewing foot must be
locked in an elevated position and the sewing-foot stroke set to the smallest
value.
2
1
5
3
4
2
6