Operation Manual

7
3 Operation
3.1 Threading the needle thread
– Place the thread reel on the thread stand and guide the needle
thread through the unwinder arm.
– The unwinder arm must be in a vertical position above the thread
reels.
– Thread in the thread through threading guides 1 and 2.
– Wind the thread clockwise around the pre-tensioner 3.
– Wind the thread counter-clockwise around the supplementary ten-
sioner 4.
– Wind the thread clockwise around the main tensioner 5.
– Pull the thread underneath the thread take-up spring 6 and pass it
through the guide 10 and thread regulator 11, up to the thread lever
12.
– Insert the thread through the thread lever 12 and the threading
guides 9, 8 and 7 on the needle bar.
– Thread the thread into the needle eye.
Caution: Risk of injury!
Switch off the main switch!
The needle thread should only be threaded when the sewing machine is
switched off.
Fig. 1 Fig
. 2
1
2
3
4
5
7
8
10
11
6
9
12