Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 95
6.5.3 Copying the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to copy an existing sewing program:
1. Select a sewing program ( p. 74).
2. Tap the P
COPY
button.
 The sewing program is copied and saved in the next free
program slot. An appropriate message is displayed.
6.5.4 Deleting the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to delete an existing sewing program:
1. Select a sewing program ( p. 74).
2. Tap the P
DEL
button.
 A message is displayed asking whether you really wish to
delete the active sewing program.
3. To delete the program, confirm by tapping the Yes button.
 The sewing program is deleted. An appropriate message is
displayed.
6.5.5 Length correction (LENGTH CORRECTION)
All the sewing steps are graded with the same factor.
In some sewing steps it is important for the quality of the result
that the grading is greater or less than this.
You can use the length correction to achieve these local
adjustments.
Prerequisite:
• Operating mode EDIT is displayed.