Operation Manual

Operating Instructions 650-10 - 02.0 - 10/2015 89
Fig. 60: Creating a new sewing program, selection window
9. Select whether the new sewing program should be mirrored for
the other side of the sewing material (Mirror programmed
side to other side), the other side of the sewing material
should be programmed (Program other side) or the pro
-
gramming should be ended (Finish).
 The selected function is indicated by an activated control
field.
10. Tap the OK button.
 The sewing program is saved. Depending on which function
is selected, different buttons are displayed:
Tapping the Abort button closes the selection window and brings
up the AUTO user interface. All previously entered data is deleted!
Function Button
Mirror programmed side to other side AUTO
Program other side PROGRAMMING
Finish AUTO